What are The TV Codes For Xfinity Remote C

What are The TV Codes For Xfinity Remote?

What are The TV Codes For Xfinity Remote?

How to Program Your Xfinity Remote to Your TV:

Do you have an Xfinity TV? It has a unique remote control that lets you change channels and volume. But you can also use this remote to control your TV. This means you can turn your TV on and off and adjust the volume using just one remote instead of two. 

This article will show you how to program your Xfinity remote to work with your TV. It’s easy and will make watching TV a lot more fun and less confusing. So, let’s get started!

What are The TV Codes For Xfinity Remote A

Different Types of Xfinity Remotes:

Xfinity has several different kinds of remotes. Some have buttons for voice control, while others don’t. The steps to program your remote will be slightly different depending on which type you have. 

Here are the main types of Xfinity remotes:

* XR15 and XR16 remotes with voice control 

* XR11 voice remote

* Older remotes without voice control

Below, we will go over how to program each remote. Look at your remote and find the one that looks most like yours. Then, follow the steps for that remote.

Programming Your XR15 or XR16 Voice Remote:

The XR15 and XR16 are the newest Xfinity voice remotes. If your remote has a big button for voice control, you probably have one of these. Here’s how to program it:

  1. Turn on your TV and Xfinity box. 
  2. Press and hold your remote’s **Setup** button until the light changes from red to green.
  3. Say “Program remote” to the microphone.
  4. Your Xfinity box will give you instructions on the TV screen. Follow the instructions by pressing the buttons it tells you to push.
  5. When it’s done, your remote will be programmed. To make sure it’s working, try pressing the volume and power buttons.

Programming Your XR11 Voice Remote:

The XR11 is an older voice remote. It looks similar to the XR15 and XR16 but doesn’t have the number buttons. Here’s how to program it:

  1. Turn on your TV and Xfinity box. Make sure your TV is set to the correct input. 
  2. Find the code for your TV. You can look it up on the Xfinity website.
  3. Press and hold the **Setup** button until the light turns green.  
  4. Enter the code you found using the number buttons. The light should flash green twice.
  5. Try pressing the power button. If your TV turns off, it works! If not, try entering the code again.
  6. Repeat these steps for your sound bar or other devices.

Programming Older Xfinity Remotes:

If your remote doesn’t have voice control, you have an older Xfinity remote. The steps will be similar to the XR11, but the buttons might have different names. Here’s what to do:

  1. Turn on your TV and Xfinity box. 
  2. Find the code for your TV on the Xfinity site.
  3. Press and hold the **Setup** or **Set** button until the light turns green or flashes red. 
  4. Use the number buttons to enter the code. The light should blink green twice.  
  5. Test it by pressing the power button. If it turns off your TV, you do it!
  6. To program your sound bar, find the code and repeat the steps. Press the **AUX** button first if your remote has one.

Automatic Programming:

If you tried entering the codes but they still are not working, you can try automatic programming. This will scan through a whole list of codes to find the right one. Here’s how:

  1. Press and hold **Setup** until the light turns green.  
  2. Enter 991 using the number buttons. The light will flash green.
  3. Press the **Channel Up** button repeatedly until your TV turns off. 
  4. When the TV turns off, press **Setup** to save the code.

Keep in mind that this can take a while since it has to scan a lot of codes. Only try this if the regular way doesn’t work.

What are The TV Codes For Xfinity Remote B

Troubleshooting:

If you’re having trouble programming your remote, here are some things to try:

* Make sure your devices are plugged in and turned on. 

* Turn everything off and start over.

* Put new batteries in your remote.

* Move anything blocking the signal between the remote and your devices.

* Call Xfinity for help if you still can’t get it to work.

Remote Control Codes:

Here is a list of some popular TV brands and the codes to program them into your Xfinity remote:

* Samsung: 1060, 1702, 1178 

* LG: 1165, 1178, 1700

* Sony: 1100, 1200, 1400

* Vizio: 1758, 1756, 1885  

* TCL (Roku TV): 1756, 1758

* Panasonic: 1480, 1250, 1650

* Toshiba: 1154, 1205, 1256

You can find more codes on the Xfinity website or in the manual with your remote. If one code doesn’t work, try the next one on the list.

Conclusion:

Programming your Xfinity remote might seem tricky, but it’s easy once you know the steps. With your remote program, you’ll only need one remote to control everything. No more juggling different remotes or getting confused. 

Find your remote type, look up the code, and follow the instructions. If it doesn’t work the first time, don’t give up! Try automatic programming or call Xfinity for help. 

Soon, you’ll relax on the couch, flipping channels and changing the volume with your remote. Watching TV has never been easier!