How to Search for Codes on Direct TV Remote?

How do you search for codes on Direct TV Remote?

How to Program Your DIRECTV Remote: A Step-by-Step Guide

You might be excited to watch your favorite shows and movies if you just got DIRECTV. But first, you need to program your remote to work with your TV and other devices. Don’t worry, it’s easy! This guide will show you how to do it step by step.

How to Search for Codes on Direct TV Remote A 1

Types of DIRECTV Remotes:

There are two kinds of DIRECTV remotes:

  1. **Genie Remote**: It has a round top and can turn your TV on and off, change the volume, and show info about TV shows.
  2. **Universal Remote**: It has square corners and can control up to 4 devices, like your DIRECTV receiver, TV, DVD player, or stereo.

Programming Your Genie Remote:

Follow these steps to program your Genie remote:

  1. Point the remote at your Genie device (HD DVR, Genie Mini, or Wireless Genie Mini).
  2. Press and hold the MUTE and ENTER buttons until the green light at the top blinks twice.
  3. Wait for the TV to say, “Applying IR/RF Setup.”
  4. Turn on the remote to control the device you want to control.
  5. Press MENU on the remote.
  6. Go to Settings > Remote Control > Program Remote.
  7. Choose the device you want to control.
  8. Follow the instructions on the TV screen to finish programming.
  • Manual Programming for Genie Remote

If the steps above don’t work, try this:

  1. Point the remote at your Genie device and press and hold MUTE and SELECT until the green light blinks twice.
  2. Enter 961 using the remote buttons.
  3. Press the channel up button once.
  4. Press Enter.
  5. When the TV says, “Your Remote is now set up for RF,” select OK.
  6. Turn on the device you want to control.
  7. Press MENU on the remote.
  8. Go to Settings > Remote Control > Program Remote.
  9. Choose the device you want to control.
  10. Follow the instructions on the TV screen to finish programming.

Programming Your Universal Remote:

The universal remote can control up to 4 devices. Here’s how to program it:

  • For an HD DVR or HD Receiver

  1. Press MENU on the remote.
  2. Go to Settings > Remote Control > Program Remote.
  3. Choose the device you want to program. If it’s not listed, use the code lookup tool to find its 5-digit code.
  4. Follow the instructions on the TV screen to finish programming.
  • For a Standard DVR or SD Receiver

  1. Press MENU on the remote.
  2. Go to Parental Favs & Setup > System Setup > Remote (Control) > Program Remote.
  3. Choose the device you want to program. If it’s not listed, use the code lookup tool to find its 5-digit code.
  4. Follow the instructions on the TV screen to finish programming.
  • Changing Your TV’s Input Source

  1. Slide the mode switch at the top of the remote to the TV.
  2. Press and hold MUTE and SELECT until the green light blinks twice.
  3. Enter 960 using the remote. The green light should blink twice again.
  4. Slide the mode switch back to the DIRECTV logo.

Resetting Your Remote to Factory Settings:

If nothing else works, you can reset your remote to its original settings:

  1. Press and hold MUTE and SELECT until the green light blinks twice.
  2. Enter 981.
  3. Press and hold MUTE and SELECT again until the green light blinks twice.
  4. Enter 961.
  5. Press the channel up button once.
  6. Press Enter.

How to Search for Codes on Direct TV Remote B

Troubleshooting Tips:

If your remote isn’t working, try these tips:

– Check the batteries and replace them if needed.

– Make sure the buttons aren’t stuck.

– Point the remote directly at the receiver with nothing blocking it.

– Try reprogramming the remote using the steps above.

Conclusion:

Now you know how to program your DIRECTV remote! Whether you have a Genie or universal remote, follow these easy steps, and you’ll be watching your favorite shows in no time. If you have any trouble, don’t give up—try the troubleshooting tips or reset your remote.