How to Program Xfinity Remote Codes C 1

How to Program Xfinity Remote Codes?

How to Program Xfinity Remote Codes?

How to Program Your Xfinity Remote:

Do you have many different remotes for your TV, cable box, streaming device, and sound system? Trying to keep track of which remote goes with what can get confusing! That’s where universal remotes come in handy. With a universal remote, you can control all your devices with just one remote. Sounds great, right? 

The Xfinity remote that comes with your TV service is universal. You can use it to control your Xfinity cable box right out of the box. But you’ll need to program it to get the most out of it. Programming lets you use the Xfinity remote to control your TV’s power, volume, and input. You can even use it to control a soundbar or other audio device.

How to Program an Xfinity Remote Using Codes:

There are several different models of Xfinity remotes. Some have a Setup button, and some don’t. We’ll go over how to program both types. First, look at how to program remotes with a Setup button, like the XR11, XR5, and XR2 models.

  • Steps for Remotes with a Setup Button:

  1. Turn on your TV and TV Box. 
  2. Press the Setup button on the remote until the light changes from red to green.
  3. Press the Xfinity button. Then, enter the 3-digit code for your TV brand, which you can find on Xfinity’s website. The LED should blink green.
  4. To finish setting up, follow any instructions that pop up on your TV screen. If you have more than one TV box, you might need to press the Xfinity button a few times.

What about remotes that don’t have a Setup button, like the XR15 Voice Remote? Here’s what to do:

  • Steps for XR15 Voice Remote (no Setup button):

  1. Power on your TV and TV Box.
  2. Press and hold the Xfinity and Info buttons together for 5 seconds. Wait for the remote light to turn from red to green. 
  3. Follow the on-screen instructions and enter the 3-digit code when asked.
  4. Keep following the on-screen steps to finish setting up control of your TV power, volume, and input.

The newest XR16 Voice Remote for Xfinity Flex is even more accessible to set up because it doesn’t have number buttons. Here’s how:

  • Steps for XR16 Voice Remote (no number buttons):

  1. Turn your TV and TV Box on. Remove the plastic tab on the remote to do this.
  2. Point the remote at the TV Box. Press the Microphone button and follow the instructions on your TV screen.
  3. If the remote is already paired for voice but you need to program it for your TV, press and hold the Microphone button and say, “Program remote.” Alternatively, use the on-screen menus under Remote Settings.

How to Program Xfinity Remote Codes A 1

How to Program an Xfinity Remote without Codes:

But what if you can’t find the code for your TV brand? No worries! You can still program your Xfinity remote using the auto-code search feature. Here’s what you need to do:

Auto-Code Search Steps:

  1. Point the remote right at the TV Box with nothing blocking the signal.  
  2. On the remote, press thSetuputton to start Setup.
  3. Choose “Remote Setup” from the options on your TV.
  4. When asked if you want to use the remote for TV power/volume, pick “Yes.”
  5. Confirm pairing for voice control, then select “Yes” again for TV control.
  6. If prompted, type in your TV brand on the on-screen keyboard and select “OK.”
  7. When you see “Remote is Ready to Pair,” choose “OK.”
  8. Try changing the volume using the remote to test if the pairing worked. 
  9. If the volume changes, select “It Works!” If not, choose “It Doesn’t Work” and try again.

These auto-code search steps should work for most Xfinity remotes when setting them up with an Xfinity TV Box. Some older models might differ slightly, but the general idea is the sadifferentbleshooting Tips:

Setting up your remote is usually pretty straightforward. But sometimes, you might run into issues. Here are some quick troubleshooting tips:

– Check that your batteries are working. Put in a fresh set if needed. 

– Wipe the remote buttons and sensor window with a damp cloth. Dirt and grime can interfere with the signal.

– Double-check that you use the proper codes for your TV brand and remote model. The Xfinity website has an online lookup tool to help.

– Try resetting your remote back to factory settings. The steps vary by model, so check your manual or Xfinity’s site for instructions.

– Make sure your TV and TV Box are powered on before you start programming.

– Position the remote so it is in direct sight of the TV Box sensor. Remove anything blocking it.

If you have multiple Xfinity TV Boxes, you might need to press the Xfinity button a few times to select the Setup one during Setup.

When All Else Fails, Reset!

If you’ve tried all the troubleshooting tips and your remote still won’t cooperate, you can try a full factory reset. Warning: this will erase all your remote’s saved settings and pairings! But sometimes, it’s the only way to get a misbehaving remote back on track. 

  • Factory Reset for XR11 RemSetupPress and hold Setup until the status light turns green.

  1. Enter 9-8-1 on the number pad. 
  2. The green light should blink twice. Now, your remote is back to factory settings.

  • Factory Reset for XR15 Remote: 

  1. Press and hold the A and D buttons until the light turns green.
  2. Type in 9-8-1. 
  3. Look for three blue blinks. This means the reset worked.

After resetting, you must repair your remote with your TV Box. Remember, your TV Box must be activated and set up before you can pair a remote to it.

How to Program Xfinity Remote Codes B 1

Conclusion:

Whew, that was a lot of information! Here’s a quick recap of the critical points about programming your Xfinity remote:

– Xfinity remotes are universal remotes that can control your TV, other devices, and your Xfinity cable box. 

– There are different Xfinity remote models. Some have Setup buttons and number keys, while others don’t.  

– You can program your remote using codes for your TV brand and model. Xfinity has an online tool to look up the codes.

– If you can’t find a code, you can use the auto-code search method by following the on-screen instructions.

– Resetting your remote to factory settings will clear all programming. Only do this if you can’t resolve issues any other way.

With your Xfinity remote programmed, you can ditch your other remotes and control everything with one. It might take a few tries to set it up just right, but it’s worth it in the long run.