How to Program Directv Remote Codes?

How to Program Directv Remote Codes?

How to Program Your DIRECTV Remote:

If you just got DIRECTV, you’re probably excited to start watching your favorite shows and movies. But first, you need to program your remote. Don’t worry, it’s not too hard! This article will teach you how to do it step by step.

Types of DIRECTV Remotes:

There are two main types of DIRECTV remotes:

1. **Genie Remote**: This remote has a round top. It can turn your TV on and off, change the volume, and show info about TV shows. 
2. **Universal Remote**: This remote has square corners. It can control up to 4 devices, like your DIRECTV box, TV, DVD player, and stereo.

How to Program a Genie Remote:

Follow these steps to program your Genie remote:

1. Point the remote at your DIRECTV box. 
2. Press and hold the *Mute* and *Enter* buttons until the green light at the top blinks twice. Then let go.
3. Wait for the TV to say, “Applying IR/RF Setup.” This means it’s ready to program.
4. Turn on the remote to control the device you want to control.
5. Press *Menu* on the remote.
6. Select *Settings & Help >> Remote Control > Program Remote*.
7. Pick the device you want to program and follow the on-screen directions.

• Manual Setup for Genie Remote

If the steps above didn’t work, try this:

1. Point the remote at your DIRECTV box.
2. Press and hold *Mute* and *Select* until the green light blinks twice. Let go.
3. Enter *961* on the remote.
4. Press *Channel Up*.
5. Press *Enter*. 
6. When you see “Your remote is now set up for RF,” select *OK*.
7. Turn on the device you want to control.
8. Press *Menu* on the remote.
9. Select *Settings & Help >> Remote Control > Program Remote*. 
10. Choose the device and follow the on-screen steps.

Programming a Universal Remote:

The DIRECTV universal remote can control your TV, stereo, DVD player, and video game system. Here’s how to program it:

• For an HD DVR or HD Receiver

1. Press *Menu* on the remote.
2. Select *Settings > Remote Control > Program Remote*.
3. Pick the device you want to program. 
4. If you don’t see your device listed, look up the code on DIRECTV’s website.
5. Follow the on-screen instructions.

• For a Standard DVR or SD Receiver 

1. Press *Menu*.
2. Go to *Parental Favs & Setup > System Setup > Remote Control > Program Remote*.
3. Find your device and select it. Look up the code online if needed.
4. Follow the on-screen directions.

• Changing Your TV’s Input Source

1. Slide the mode switch to *TV*.
2. Hold down *Mute* and *Select* until the green light blinks twice.
3. Enter *960* on the remote. The light should blink twice more.
4. Slide the mode switch to the DIRECTV logo.

• Resetting Your Remote to Factory Settings

If nothing else works, try resetting the remote:

1. Press and hold *Mute* and *Select* until the green light blinks twice.
2. Enter *981*. 
3. Press and hold *Mute* and *Select* again until the light blinks twice.
4. Enter *961*.
5. Press *Channel Up* once.
6. Press *Enter*.

Troubleshooting Tips:

If your remote stops working, try these things:

– Make sure no buttons are stuck. Run your finger over them.

– Check the batteries. Hold down any button:

   – Solid green light = Good batteries

   – Fast blinking green = Batteries getting low

   – Slow or no blinking = Replace batteries now

– Point the remote right at the receiver with nothing in the way.

– Make sure the remote is controlling the right device. Slide the mode switch.

– If all else fails, reprogram the remote.

Wrapping Up:

Programming your DIRECTV remote may initially seem tricky, but it’s pretty simple once you know the steps. Whether you have a Genie remote or the universal kind, follow the instructions carefully, and you’ll be all set. 

Remember to double-check which devices you’re trying to control and ensure you have the correct codes. If you run into trouble, try resetting the remote or replacing the batteries.

With your remote working correctly, you can sit back, relax, and enjoy all your favorite DIRECTV programming.