How do you program any remote to a TV without Codes Roku?
Have you ever wanted to control your TV, DVD player, or other devices with just one remote? An ONN universal remote can do just that! This article will show how to program your ONN remote to work with up to four devices. Don’t worry; it’s easier than you might think!
What You’ll Need:
Before we start, make sure you have the following:
Your ONN universal remote
The device you want to control (TV, DVD player, etc.)
The device’s manual (if you have it)
Programming Your ONN Remote Without a Code:
If you don’t have the code for your device, don’t worry! You can still program your ONN remote. Here’s how:
-
Step 1: Turn on Your Device
First, turn on the device you want to control, like your TV or DVD player.
-
Step 2: Press and Hold the Program Button
On your ONN remote, find the “Program” button and press and hold it until the “Power” button lights up red.
-
Step 3: Press the Device Button
Now, press the button for the device you want to control. For example, if you’re programming the remote for your TV, press the “TV” button. If you’re programming it for a streaming device like Roku or Amazon Fire TV Stick, press the “Stream” button.
-
Step 4: Point and Hold the OK Button
Point your ONN remote at the device and press the “OK” button. Keep holding it down while the remote tests different codes. This might take up to 10 minutes, so be patient!
-
Step 5: Release the OK Button
Once your device turns off, the remote has found the correct code. You can now let go of the “OK” button. Test your remote by pressing the “Power” button to see if your device turns on. Try some other buttons, too, to make sure they work.
Programming Your ONN Remote With a Code:
If you have the code for your device, programming your ONN remote is even easier. Here’s what to do:
-
Step 1: Find the Code
Look for the 4-digit code in the manual with your ONN remote. If you can’t find it, go to the ONN remotes website (https://www.onnremotes.com) and search for your device’s code.
-
Step 2: Turn on Your Device
Just like before, turn on the device you want to control.
-
Step 3: Press and Hold the Program Button
Press and hold the “Program” button on your ONN remote until the “Power” button turns red.
-
Step 4: Press the Device Button
Press the button for the type of device you’re programming, like “TV” or “Stream.”
-
Step 5: Enter the Code
Using the number buttons on your ONN remote, enter the 4-digit code for your device. The red light should turn off, meaning the code was entered correctly.
-
Step 6: Test Your Remote
Point your ONN remote at your device and press the “Power” button. If your device turns off, you’ve successfully programmed your remote! If not, enter the following code from your manual or the website.
Troubleshooting Tips:
If you’re having trouble programming your ONN remote, here are a few things to try:
Use the Auto Code Search: If the manual codes aren’t working, try using the automatic code search method described earlier.
Try a Different Code: Sometimes, specific codes may work better than others. Try a different code if the one you’re using doesn’t let you control things like volume or fast-forward.
Check for Obstructions: Ensure nothing is blocking the signal between your ONN remote and device.
Replace the Batteries: If your remote isn’t working well, it might need new batteries.
Conclusion:
Now that you know how to program your ONN universal remote, you can control all your devices with just one remote! Remember, if you ever get stuck, you can always try the automatic code search or look up the codes online.