How to Program any Remote to a TV without Codes?

How do you program any remote to a TV without codes?

How to Program a Universal Remote to Your TV Without Codes:

Have you ever lost your TV remote? Or maybe it broke, and you had to get a new one? A universal remote can control your TV and many other devices, so you don’t need to keep track of many remotes.

But programming a universal remote can be tricky, especially if you don’t have the manual with the codes. Don’t worry, though! You can set up your universal remote without using codes. This article will show you a few different ways to do it.

How to Program any Remote to a TV without Codes 1 1

Before You Start:

Make sure your universal remote has fresh batteries. If the batteries are low, the remote might not work well. Also, find the model number of your remote. It’s usually on the battery cover or printed on the remote’s front. Knowing the brand and model will help if you need to look up information online.

You will also need to know your TV’s brand. Look on the front and back for a label with a name like Sony, Samsung, LG, etc. Have your TV turned on and ready to go before you start programming the remote.

Method 1: Trying One Code at a Time:

One way to program your universal remote is to try entering codes one by one until you find the one that works. Follow these steps:

  1. Turn on your TV.
  2. Press the button on the remote for the type of device you want to control, like TV, DVD, CBL, etc. The light on the remote should turn on. 
  3. Press and hold the SETUP button until the light blinks and stays on. Then let go.
  4. Enter one of the 4-digit codes for your TV brand. Code lists are available online. Try googling “universal remote codes for (brand).”
  5. Aim the remote at the TV and press the power button. If the TV turns off, you have the correct code! If not, repeat steps 3-5 with the following code on the list.
  6. Once you find a working code, press the SETUP button to lock it in. Your remote should now control your TV.

This method requires some trial and error. You might have to go through a long list of codes, but if you can find the code list for your remote brand, it’s a good place to start.

Method 2: Using the Code Search Feature:

Many universal remotes have a code search option that scans all the possible codes for you. Here’s how to do it:

  1. Turn on the TV you want to control.
  2. Press and release the button for the type of device, such as a TV.
  3. Press and hold the SETUP button until the light turns on. Release the button. 
  4. Enter 9 – 9 – 1. The light should blink twice.
  5. Aim the remote at the TV. Press and release the POWER button once every second until the TV turns off. This can take a few minutes.
  6. Press the SETUP button to save the code as soon as the TV turns off. The light should blink twice.
  7. Turn the TV back on and try the remote to ensure it works. If it doesn’t, start the code search again.

The code search method is slower than entering codes, but you don’t need a code list. It’s a good option if you can’t find your remote’s model number or your TV’s brand. Just be patient and keep the remote pointed at the TV.

Method 3: Auto Code Search:

Some universal remotes can automatically scan for the correct code. Look for a button labeled CODE SEARCH or something similar. Here’s how to use it:

  1. Turn on the TV.
  2. Hold down the CODE SEARCH button until the light stays on. 
  3. Release the CODE SEARCH button. The remote light should stay on.
  4. Point the remote at the TV. Press and release the POWER button. 
  5. Keep pressing POWER about every 2 seconds until the TV turns off. This could take a while, so be patient.
  6. When the TV turns off, stop pressing buttons. Press and release the ENTER button.
  7. Test the remote to make sure it is controlling the TV.

Like the manual code search, auto code search can be slow. But it’s the easiest method if your remote supports it. You keep clicking until the TV turns off.

Method 4: Learning from Your Old Remote:

If you still have your old TV remote, you can program the universal remote by “learning” from it. This only works with some universal remotes that have a learning feature. Check your manual to see if your remote can learn. Here are the steps:

  1. Put the universal remote and the old TV remote head to head, about 2 inches apart.
  2. Press the button on the universal remote for the type of device, such as a TV.
  3. Press and hold the SETUP button until the light blinks twice.
  4. Enter the code for learning, which is usually 9 – 7 – 5. 
  5. The light should stay on. Press and release the button you want the remote to learn, like POWER.
  6. On the old remote, press and hold the matching button (POWER) until the light on the universal remote blinks. If it doesn’t blink after a few seconds, try again, moving the remotes slightly closer.
  7. Repeat steps 5-6 for each button you want to learn (volume, channel, etc.). 
  8. When done, press the SETUP button to turn off learning mode.

Learning can take a while, but it copies the exact signals from your old remote. It’s great if you have an unusual TV brand that doesn’t work with the preset codes.

Tips for Programming Your Universal Remote:

– If one method doesn’t work, try a different one. You might need to combine several techniques.

– Check online for tutorials and code lists for your remote brand and model. The manual that came with the remote might also have instructions.

– If the universal remote works with some features of your TV but not others, it might not be fully compatible. You may need to use Code Search or Learning to control the missing functions.

– Write down the code that works for your TV so you don’t forget it. If the batteries die or you must reset the remote, you’ll need that code again.

– Be patient! It can be frustrating when the codes don’t work, but keep trying different methods. You’ll eventually get your remote programmed.

Now that you know a few ways to program a universal remote without codes, you can make your new remote work with your TV. It might take some fiddling, but follow the steps carefully and keep trying. Soon, you’ll be channel surfing with ease!

How to Program any Remote to a TV without Codes 2 1

Tips for Programming Your Universal Remote:

  • Codes:

Trying one code at a time:

  1. Turn on your TV.
  2. Press the device button on the remote (TV, DVD, etc).
  3. Hold the SETUP button until the light blinks. Release.
  4. Enter 4-digit code. Find codes online.
  5. Aim remote. Press POWER. If the TV is off, the code works!
  6. Press SETUP to save the code.
  • Code search:

  1. Turn on the TV. 
  2. Press the device button. 
  3. Hold SETUP until the light is on. Release. 
  4. Enter 9-9-1. The light blinks 2x.  
  5. Aim remote. Press POWER every second until the TV is off. 
  6. Press SETUP to save. The light blinks 2x.
  7. Turn on the TV. Test remote.
  • Auto code search:

  1. Turn on the TV.
  2. Hold CODE SEARCH until the light is on. Release.  
  3. Aim remote. Press POWER every 2 seconds until the TV is off.
  4. Press ENTER.
  5. Test remote.
  • Learning from old remote:

  1. Put remotes head to head.
  2. Press the device button on the universal remote. 
  3. Hold SETUP until two blinks. 
  4. Enter 9-7-5.
  5. Light on. Press the button to learn (e.g., POWER).
  6. On the old remote, hold the matching button until the universal blinks. 
  7. Repeat 5-6 for each button. 
  8. Press SETUP to end learning.