How to Program a GE Universal Remote Codes?

How to Program a GE Universal Remote Codes?

An Easy Guide to Setting Up Your GE Universal Remote:

Most homes nowadays have multiple devices like TVs, DVD players, streaming boxes, and more. Having separate remotes for each one can get confusing and frustrating. That’s why universal remotes are so handy – they allow you to control all your devices with just one remote control. The GE Universal Remote is a popular choice that can operate TVs, cable boxes, DVD players, and lots of other electronics.

In this guide, we’ll walk through the simple steps to program your GE Universal Remote. We’ll cover how to do it with codes and without codes. Everything will be explained in an easy-to-understand way using short sentences and common words, just like you’d explain it to a 5th grader. Let’s get started!

Understanding Remote Codes:

Each device like your TV or DVD player has its special code. This code is like a secret language that tells the remote how to “talk” to that particular device and give it commands. 

To program your GE remote, you need to enter the right code for your device model. Then the remote will know how to properly control that device.

GE provides lists of codes for different brands and models in the user manual or online. If you have these codes handy, programming is really easy. If not, don’t worry – there’s another way too.

Programming With Device Codes:

This is the fastest way if you know the codes for your devices. Just follow these simple steps:

  1. Turn on the device you want to control (like your TV or DVD player).
  2. On the remote, press and hold the “Setup” button until a red light turns on.
  3. Press the button for the type of device you want to program (TV, DVD, etc). 
  4. Use the number buttons to enter the code for your device’s brand and model.
  5. Point the remote at the device and press a button like Power to test if it works.

If it doesn’t work the first time, just repeat the steps trying a different code from the list. Easy!

Programming Without Codes:

What if you don’t have the code list handy? No problem! Your GE remote can search and find the right code itself. It takes a bit more time, but here’s how:

  1. Turn on the device you want to control.  
  2. Press and hold “Setup” until the red light stays on.
  3. Press the button for that type of device (TV, DVD, etc). The light should blink once.
  4. Point the remote at the device and press the Power button repeatedly.
  5. Each time you press Power, it tries a different code to control the device. 
  6. When the device turns off, quickly press the “1” button to lock in that code.
  7. Test other buttons to make sure everything works properly.

If it doesn’t work at first, just keep pressing Power and trying codes until your device turns off. Then lock it in! It may take some patience, but it gets the job done.

Common GE Remote Codes:

In case you do need some codes to try, here are some common ones for popular devices:

  • TVs

Samsung: 0105, 0009  

LG: 0004, 0050

Sony: 0000, 0032

Vizio: 0081, 0112  

  • DVD/Blu-ray Players

Sony: 1516, 0046

Samsung: 1204, 1005

Panasonic: 1762, 1489

  • Cable/Satellite Boxes  

Comcast: 01982

DirecTV: 0392, 10178

Dish Network: 627

Try inputting those codes following the steps above to see if they work for your devices. If not, check the GE website or manual for more codes.

Give it a try and your GE remote will be all set up in no time! Let us know if you get stuck or have any other questions.

Final Words:

Congratulations, you made it through! Setting up a universal remote may seem a little tricky at first, but it’s not too hard once you get the hang of it. 

The main things to remember are:

– Find the codes for your devices from GE’s lists if possible

– If not, use the code search to have the remote figure it out

– Be patient and test different codes until your devices respond

– Don’t hesitate to start over if you get stuck

With a GE Universal Remote, you’ll be able to control your entire TV, audio, and video setup using just one simple controller instead of juggling multiple remotes. So convenient!

Kick back, relax, and enjoy easily commanding your home theater with just a few buttons on your new universal remote. No more hassle of misplacing remotes or wondering which one you need. One remote to rule them all! Happy viewing!