How do you program a Blackweb Universal Remote without codes?

How to Program Your Blackweb 6-Device Universal Remote:

Do you have a new Blackweb universal remote? It can control up to 6 devices in your home, like your TV, DVD player, streaming box, and more. This guide will show you step-by-step instructions on how to set up your remote. Let’s get started!

Finding the Right Codes:

The first thing you need to do is find the correct remote codes for your devices. Remote codes tell your Blackweb remote how to talk to and control each device. There are a few ways to find the codes:

Look in the user manual that came with your remote. It should have a list of standard device codes.
If you can’t find the manual, don’t worry. We have an extensive list of Blackweb remote codes at the end of this article. Find your device brand and write down the 4-digit code next to it.
If you try a code that doesn’t work, that’s okay. Sometimes, there are a few different codes for the same brand. Try the following code on the list until you find one that works.

Programming the Remote:

Once you have the codes, you’re ready to program the remote. Follow these steps:

Turn on the device you want to control, like your TV.
Ensure your remote has fresh batteries so it doesn’t turn off during programming.
Press the SETUP button on the remote until the red light comes on. This means it’s ready to learn a new code.
While the red light is on, use the number buttons on the remote to enter the 4-digit code for your device.
If you enter the code correctly, the red light will turn off. If it is still on, you may have entered the code incorrectly. Double-check the code and try again.
Now, test if it worked. Point the remote at your device and press the power button. If the device turns off, you’re done! If not, repeat the steps and try a different code from the list.

You can repeat this process for each device you want to control with your universal remote. Most Blackweb remotes can handle up to 6 devices.

The Code Search Method:

If you can’t find a working code in the manual or our list, the Code Search method is another way to program the remote. Here’s how it works:

Turn on the device you want to control.
Press and hold the PROGRAM button until you see a blink. This means the remote is in learning mode.
Select the type of device you’re programming, like TV, DVD, streaming box, etc.
Point the remote at the device and press and hold the OK button.
Keep holding OK until your device turns off. As soon as it turns off, let go of the OK button. This means the remote found a code that works.

The Code Search method tries every possible code until it finds one that can control your device. It may take some time, but it’s a good option if nothing on the code list works.

Blackweb Universal Remote Codes

Here is a list of common Blackweb remote codes sorted by device brand. Find your brand, enter the code, and try it. Remember, you may need to try a few codes to find the right one.

TV Codes:

Insignia: 0135, 1171, 0133
LG: 0004, 0009, 0156
Panasonic: 0054, 0062, 0381
RCA: 0004, 0077, 0113
Samsung: 0007, 0012, 0104
Sharp: 0004, 0006, 0020
Sony: 0002, 0033, 0152
TCL/Roku: 2479, 2490, 3532
Toshiba: 0012, 0095, 0181
Vizio: 0033, 1168, 2474

DVD/Blu-ray Player Codes:

Insignia: 0456, 1408, 1874
LG: 1980, 1981, 2281
Magnavox: 0456, 1877, 1934
Panasonic: 0148, 1923, 1925
Philips: 0456, 1877, 1976
Samsung: 0454, 1099, 1908
Sony: 1934, 1935, 1936
Toshiba: 1850, 1851, 1852

Final Thoughts:

You can program your Blackweb universal remote with the proper codes and time to control all your favorite home theater devices. No more juggling multiple remotes!

Remember these key points:
1. Find your device codes in the manual or our list
2. Enter the code while holding SETUP
3. Test different codes until you find one that works
4. Try the Code Search method if needed

With your remote all setup, you’ll be surfing channels, adjusting the volume, and playing movies with a single remote. Enjoy the convenience of your Blackweb universal remote!