Att Uverse Remote Codes How to Program C

Att Uverse Remote Codes How to Program?

Att Uverse Remote Codes How to Program?

Programming Your U-verse TV S20 and S30 Remote Control: A Step-by-Step Guide:

If you have an AT&T U-verse TV service, you may need to program your S20 or S30 remote control to work with your TV, DVD player, or other devices. This guide will walk you through programming your remote control using simple, easy-to-follow steps.

What You’ll Need:

Before you begin, make sure you have the following:

– Your U-verse TV S20 or S30 remote control

– The device you want to program (TV, DVD player, etc.)

– The user manual for your device (optional)

Att Uverse Remote Codes How to Program A 1

Step 1: Identify Your Remote Control Model

The first step is to identify which remote control model you have. The S20 and S30 models are very similar, the only difference being that the buttons on the S30 light up. If your remote buttons light up, you have an S30 model. If not, you have an S20.

Step 2: Choose a Programming Method

Depending on your device and preferences, there are several ways to program your remote control. The most common methods are:

  1. Using the TV Remote Control Setup Tool
  2. Using the Auto Code Search
  3. Programming the Remote Manually
  4. Using Your Remote Control Memory

We’ll go through each technique in detail below.

  • Method 1: Using the TV Remote Control Setup Tool
  1. Turn on your TV.
  2. Press your remote’s “Menu” button, then select “Help.”
  3. Choose “Remote Control Setup.”
  4. Select your remote control model from the list.
  5. Follow the on-screen instructions to complete the programming.
  • Method 2: Using the Auto Code Search
  1. Turn on the device you want to program.
  2. Press and hold the “Mode” button for your device (TV, DVD, or AUX) and the “Enter” button simultaneously. The Mode buttons will flash twice.
  3. Press the “SCAN/FF” button repeatedly until your device turns off.
  4. Press the “Power” button to turn your device back on.
  5. Test the remote functions to make sure they work correctly.
  6. Press “Enter” to save the programming.
  • Method 3: Programming the Remote Manually
  1. Turn on the device you want to program.
  2. Find the 4-digit setup code for your device in the user manual or online.
  3. Press and hold the appropriate Mode button (TV, DVD, or AUX) and the “OK” button for one second, then release. The Mode buttons will flash.
  4. Enter the 4-digit code. The Mode button will flash once if the code is correct.
  5. Point the remote at your device and press the “Power” button. If the device turns off, the programming is complete.
  • Method 4: Using Your Remote Control Memory
  1. Turn on the device you want to program.
  2. Press and hold the appropriate Mode button and the “OK” button until the Mode buttons flash twice.
  3. Enter “922.” The selected Mode button will flash twice.
  4. Press and hold the “PLAY” button until the device turns off.
  5. Search for the correct code using the “REW” and “FF” buttons.
  6. Press “ENTER” to save the code.

Att Uverse Remote Codes How to Program B 1

Tips and Troubleshooting:

– If your remote isn’t working, check the batteries and make sure all cables are correctly connected.

– If you’re still having trouble, try unplugging your receiver for two minutes and then plugging it back in.

– Some manufacturers have multiple codes. If the first code doesn’t work, try the next one on the list.

– If you can’t find your device’s code, you can search your remote control’s memory using Method 4.

Conclusion: 

Programming your U-verse TV S20 or S30 remote control may seem daunting initially, but with these simple steps, you’ll have it working quickly. Whether you choose to use the TV Remote Control Setup Tool, Auto Code Search, manual programming, or your remote control memory, you can control all your devices with one easy-to-use remote. If you have questions or need further assistance, consult your user manual or the AT&T support website for more information.